Question about Chrysler LHS
...fuel pump then if its good check the wiring for the system.there is also a pump relay in the system to check,if there is no power to the tank unit then changing the pump is not going to fix the ...
...The fuel pump relay provides power to the pump for 3 or 4 seconds and if the computer does not "see" oil pressure it will not continue to power the pump. That is to prevent a fire in a
no power to fuel pump on 1996 lhs power to relay but not to pump look for fusible link in wireing ..
...fuel pressure and i changed the pump.i check all fuses and relays Hello brian1971ohi, Did you check for good power and ground at the pump? The dark green with white strip is your B+ wire you should ...
...fuel pump power feed or the fuel pump relay. or ? a inertial cut out sw, or rollover switch. (i said generic) now rule 2: if spark is bad, the ECU cuts fuel, BY DESIGN. that dont mean spark really is ...
...power, like the lights work and my car will crank but wont fully start. my father says it might fuel pump. but today i had a spark plug tester and it said theres no spark, so know i dont know what to ...
Question about Chrysler LHS
...fuel pump hums and the lights go on and all that but it just won't turn over what causes that or how can I fix that or something If the engine does not crank, do you have power at the starter ? Have ...
...fuel mixing and pressure is determined in this section. You need to have the pump calibrated if the pressure at the injector is low. If the car has starting problems then check these tips: ...
...there is no power being distributed back to the fuel pump. I checked the connection and it is plugged in properly. These cars have a history of bad camshaft sensors. This would be my first
303 questions posted
Usually answered in minutes!
229 Questions
216 Questions
228 Questions
145 Questions
120 Questions
