1987 Jeep Wrangler "3 engine firing" Questions

...Clockwise Fig. 2: 1992-95 2.5L engine Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise Fig. 3: 4.0L and 4.2L engine Engine Firing Order: 1-5-3-6-2-4 Distributor Rotation: ...

3 and 4 and there is no change in engine running. Really running rough at idle but seems to run fine on acceleration. Can anyone help? check the injectors and make sure there is fire on those plugs in

firing order for a 94 jeep wrangler 2.4l for 2.5L engine, autozone says Firing order 1-3-4-2 --Distributor rotates clockwise

...3 4 2 for the four. The distributor rotation is clockwise. To find Top dead center (for wire to cylinder #1 on distributor), look for and line up the timing marks on the crankshaft (front of the ...

...3 seconds? then stalls ? the engine and spark are ok and all it is , is bad carb. (flooding or starving) i can remove your carb and stand there with my spray can and run you engine as long as i ...

...engine cranking (starting). P 1391 =Intermittent Loss of either Camshaft Position Sensor or Crankshaft Position Sensor. Hav you attemtped the "3-Key-Ons" method to see these codes on your digital ...

straight six Hi JT, The typical firing order for a straight six is  1-5-3-6-2-4. If this doesn't help let us know the specific engine your working on and we'll help you. Regards John 

no mechanic so any feedback wud be awesome the firing order is 1-3-4-2 it also says it on the right side of the engine block...or the drivers door panel will tell you....just in case its a funky model

3. check engine light comes on and even says miss fire on all those cylinders. Jeep dealership can't even figure this one out...had it for a month now and nothing, anyone have ideas? bad fuel pump can

...ENGINE. I BELIEVE THE ORDER IS 1-3-4-2 BUT WHICH CYLINDER IS 1,2,3,4 AND HOW IS THE DISTRIBUTOR CAP ORIENTED IN RELATION TO SAME? THANKS, BRIAN. on the intake manifold it has the cylinders numbered ...