...change a water pump in a 2001 nissan frontier v6 (non supercharge) you need to remove the whole front end of the engine apart. the pump is behind the timing belt. may as well replace that and the ...
...change the timing belt and have a water pump start leaking only 20K later and ruin the belt with antifreeze? Other items during the 105K are a major tune up with all the fluids changed and a lube. ...
Question about Nissan Frontier
...water pump that was changed and sealed sorry for nthatn mistake that is why i ask if this car has freeze plugs.the car leaks only at night after it is shut down and if the water pump is leaking what ...
water pump is bad or the seal just broke. I have a nissan altima 1995, there antifreeze leaking from the water pump (seal). I will be removing the water pump and changing it, if its bad anyway to tell
Water pump leaks, needs replaced Obviously if a Water Pump is leaking that is indicative of a Seal Failure and requires replacement. This is a job you can do yourself if you are handy with tools. ...
...water pump malfunction no indications on the gauges but car seems to be running hot this is most likely the water pump if it is leaking at front of engine, the water pump is under the large timing ...
...change the timing belt, I decided to go through the process of changing the water pump. I have removed all components following Hayne's auto guide and have taken off the water pump. I noticed that it ...
...change Hi, This is called the water pump weep passage which is a sign that your seal in the water pump has failed. You need to replace the water pump. I want to see a diogram on how i can replace the ...
Question about Nissan Frontier
...the engine off, use a mirror to look under the water pump pulley to see if any fluid is dripping from the water pump seal weep hole. If it is, change the water pump. Good luck, let me know.
Question about Cars & Trucks
...water pump changed three times in less than a year starting November 2011 If you are changing seals and water pumps that frequently then the problem is run out in the end of the shaft. Could be a bad ...
449 questions posted
Usually answered in minutes!
482 Questions
408 Questions
305 Questions
268 Questions
209 Questions