20 Most Recent 2002 Nissan Frontier Crew Cab Questions & Answers

How to replace a starter on a 2000 nissan frontier v6 3.3L ...

? 3:14
Jan 6, 2013 - Uploaded by Raul Romo I show how To replace a starter on a 2000 Nissan frontier Part 1. ... and solenoid plug from under the rubber splash guard in thewheel well.

2002 Nissan... | Answered on Dec 29, 2016

Most likely you have a bad relay. Relay's typically control more than 1 source or part, and you will usually find the relay inside of the Hazard switch itself. Call your local Nissan dealer and run that by them to make sure thats common for that model too. If so, picking up a new Hazard switch should be relativley cheap and easy!

2002 Nissan... | Answered on Dec 09, 2016

Can do what you want to as long as the pressure that your manufacturer recommends is present for your vehicle to run properly. Keep in mind that the pump wiring of original fuel pump supplies information to other components and when installing this new pump, it continues to do so.

2002 Nissan... | Answered on Nov 26, 2016

Just type in on pc, 02 nissan frontier 4x4 vg33 to insall idle air control valve. I think the manifold has to come off to get to valve, it is under manifold. When page comes up, just click on nissan part 2 to watch the video on the valve. God-Bless you and your family! The video shows the removal and instalation

2002 Nissan... | Answered on Nov 02, 2016

do a coolant system pressure test to make sure no internal leakage -cracked head--- head gasket improperly installed --warped head -and recheck the fan clutch new doesnt mean free from defects

2002 Nissan... | Answered on Oct 27, 2016

Depends on the vehicle. Could be the multifunction switch, fuse, flasher module, bulbs...etc

2002 Nissan... | Answered on Oct 07, 2016

is the service engine soon light on?? if so what is the code??

2002 Nissan... | Answered on Aug 22, 2016

Limp mode is triggered by a serious issue with the cars transmission or engine controls.

2002 Nissan... | Answered on Mar 24, 2016

Check the bottom mount bolt is tight and the spindle is upright.

2002 Nissan... | Answered on Jan 15, 2016

You will need to disassemble the hub and count the splines.

2002 Nissan... | Answered on Nov 16, 2015

its under the intake manifold .....need to pull intake it's right in the middle of the valley under the intake

2002 Nissan... | Answered on Nov 06, 2015


2002 Nissan... | Answered on Oct 25, 2015

Some people change oil at 3000 miles,most people don't really care or keep track
I would say 3 times a year,if you drive less than 10,000 per year
4 times a year ,up to 20,000 miles per year driven
Use at least semi or full synthetic oil

2002 Nissan... | Answered on Jul 12, 2015

It may be rust or dirt accumulating between the rotor and rotor shield. Check for this and remove any rust and scale present also check disc brake pads at the same time these can sometimes make a grinding noise.
Hope this helps

2002 Nissan... | Answered on Jul 12, 2015

Can't and why would you something is major wrong and will not be protected in a collision. THE AIRBAGS WILL NOT DEPLOYMENT AND ANYONE IN VEHICLE COULD HAVE MAJOR INJURY.

2002 Nissan... | Answered on Apr 14, 2015

Not finding what you are looking for?
2002 Nissan Frontier Crew Cab Logo

448 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frontier Nissan

  • Frontier Nissan

Most Popular Question

put inline fuel pump bypass in tank pump

  • Cars & Trucks