...lower ball joint on 1999 F150 4WD I need to know if it is possible to remove and replace the lower ball joint on my f150 4 WD truck- 1999 model. The Hayne's manual says it must be replaced with the ...
lower right ball joint on my '96 F150 Reg Cab 4x4? first of all you will need a balljoint press and a hub nut socket then you just have to remove the lockout and hub to pull out the axle to get to the
...frontend 4x4 f150 supercrew usually lower ball ball joints. if they have zert fittings, go ahead and grease them. if they are not there replace the lower ball joints. youll be happier in the long
...lower ball joint i assume its a twin i beam, so remove tire , brake calipers and secure, remove splash shield and cotter pins at ball joints and tie rod, remove holding nuts and peparate tie rod then ...
...removing both the up and lower ball joint studs. I hope this is some what usefull. No matter what take your time and post more info. Be specific on what you need to do.................
...ball joint. You should be able to see which side and whether upper or lower, by seeing the pressure causing flex and jerks. Although it is usually either one with a rubber rip or the lowers. But ...
I have a 93 ford f150 reg cab long bed. Wanted to know if I need anything special to replace the front upper and lower ball joints. you need a ball joint press if you have the split I beams
how do i replace the lower ball joint on my 98 ford f150? grab your self a chilton book there a great source of help and will usually inc torque specs too
need to replace lower ball joint on 1994 f 150 twin i beam Look on --YOU TUBE They have really good car & truck movies, on all kinds of stuff
...lower ball joint jack up the truck on that side and have the tire a half inch off the ground, use a tire iron to see if it moves up or down if it does do the same thing but look on the inside and see ...
948 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
