...change the starter solinoid on my 87 corvette, or take it to the shop? usually pretty easy on an old chevy motor unless you have pipes in the way. Jack it up and put some stands under it. I take the ...
...change starter motor open the bonnet disconnect battery terminals. then raise vehicle on hoist or car stands. then disconnect the wiring that's connected to the starter motor. once everything is ...
...change a starter for a 2005 buick le sabre car stalls when it starts Disconnect the battery negative cable. Raise and support the vehicle. Refer to Vehicle Lifting. Remove the torque converter cover. ...
change starter on Triton 5.4 Ford 250 1998 1. Disconnect the battery ground cable. 2. Raise and support the vehicle. 3. Remove the starter motor solenoid terminal cover. 4. Remove the nut and remove ...
change a starteer on a 1999 ford taurus Disconnect the cable from the negative post on the battery. Use a floor jack to raise the car up and use jack stands to support the car. Remove the starter ...
...change it as the exhaust is probaby right over top of it abd it has to go downwards and can only be accessed from the botom if it is on the front of your motor then disconect the baterie and look for ...
...change the starter on a 1990 dodge dakota starter is on the left side of the motor disconect the battery raise left side of truck up place jack stand under it remove the 2 starter wires from the ...
...2 electrical cable one a ring connecter which bolted to the starter motor and there is another wire with a lug pin . There is also another wire with lug pin coming from the relay square looking item ...
...2.7 Starter motor issues After install a new starter motor, all is working fine until 3 or 4 times of starter use. After that ,the starter motor's pinion gear is not constantly engaging the ring gear ...
640 questions posted
Usually answered in minutes!
544 Questions
356 Questions
269 Questions
277 Questions
227 Questions