1997 Pontiac Sunfire "replace window regulator motor" Questions

...replace the power window motor and regulator on the drivers side door and how many rivets there are THERE WILL BE 2 10mm NUTS THAT HOLD THE GLASS TO THE REGULATOR, REMOVE THOSE. THE REGULATOR IS HELD ...

Replace regulator on driver's side window of a 2005 Sunfire I have already purchased the regulator. We removed the panel from the door and were able to hook up the regulator to make sure that's all we

...window from the regulator rails and lift the window up and out of the door. Remove the bolts holding the regulator and motor assembly. There are probably 2 bolts on each of the 2 rails and 2 or 3 ...

...window regulator which is usually replaced as a unit with the motor. Not difficult, pull off door panel and plastic liner and see the nuts to remove....about 4. tape glass up to top and pull out ...

Replace regulator on driver's side window of a 2005 Sunfire I have already purchased the regulator. We removed the panel from the door and were able to hook up the regulator to make sure that's all we

window of a 2001 sunfire gt 2 door doesnt have a solinoid only a motor and a regulator check with advance.com i thimk that model you must replace them both the motor is not a seperate buy? its riveted

...replace a power window on a 2005 2 door pontiac sunfire? could you describe to me in details on how to install one? i'd greatly appreciate it! And also, i'd appreciate it too if you list what ...

...window regulator motor is shot. GM cars are known for that particular issue - especially Buicks. I replaced all 4 of them in a 2001 LeSabre. Anyway, your manual, or maybe even the fusebox inside the ...

at the same time and it goes up a half inch at a time. Take the door panel off. You will see how it works and what is worn and needs to be replaced you need a window regulator and motor. A.C. GM tech.

...window motor, Undo the bolts and drill out the 3 rivets holding it to the door(you car replace these rivets with bolts later to make the next time easier) then unscrew the regulator bar from the ...