what are the camber/toe in specs. for a 2000 pontiac sunfire? dont have the exact numbers, but camber is around -0.75, and toe is 0.
...Toe−in (0.08 ± 0.08 in. This is the only Land Cruiser Specs I could find, hope it helps Can u plz give an idea how to convert Toe in from mm or inch to degrees? because my Wheel alignment ...
Toe" - see note below. The alignment specs are as follows ... ALIGNMENT SPECIFICATIONS AT VEHICLE CURB HEIGHT A. FRONT WHEELS CAMBER Acceptable -0.6° to +0.6° Preferred +0.0° Side to Side Differential
looking for the spec's for the toe in toe out on a 95 chevy pickup 2 wheel drive THE STANDARD FOR LIGHT TRUCKE IS 1/16HT TO 1/8TH INCH + TOE
specs This is just a free chat room We have no info like that We are at home & use the site-- the same as you do FORD FUSION Hybrid (2013-2014) use lugnut torque of 100 ft.lbs. FRONT toe 0.2 ± 0.2
Question about Pontiac Sunfire
Rear wheel toe spec. for 2010 E350 Mercedes sedan (steel springs) One specialist says 1.6mm +-1.0mmtotal toe another says 4.6mm +-1.5mm . drive wheels tend to pull forward and will as a result tend to
toe adjustment for a 1998 ford windstar 3.8L Hello Snsimpson Here are all the specs for the Windstar. FRONT ALIGNMENT (CURB HEIGHT WITH 1/2 TANK OF FUEL) Camber Nominal -0.25° Minimum -0.75°
...toe-in specs for a 99 JGC, 4WD, 4.7, tow package. + 1/8" has been suggested, but want to be sure. Just replaced tie rod ends and have the "squeals" going around corners, etc. If you have just spent ...
toe set 0.0 +- 0.2 check 0.0 +- 0.2 Steering wheel angle set 0.0 +- 3.5 check ...0.0+- 3.5 i have rear specs too let me know if you need them..Anything you need to know about a f-body just let me know
...specs for 1988 Chevy Caprice 4.3 What are the front-end alignmnet specifications (Caster, Camber and Toe) for a 1988 Chevolet Caprice with 4.3 engine? The Caster should be between 2.3degreesand ...
1,299 questions posted
Usually answered in minutes!
731 Questions
699 Questions
696 Questions
696 Questions
688 Questions