1991 Oldsmobile Cutlass Supreme "dimmer switch loose" Questions

...the highbeams on. that is either the headlight switch is bad or a connector on headlight switch also poss the dimmer switch. check both headlight switch and or dimmer switch one of them is burnt

...covering it first). Could also be the dash headlamp switch or even the dimmer switch. Good luck!! and let me know what you find. mine has a bad connector in the blinker switch that is causing a ...

dimmer switch actuating rod. Remove the attaching nut and remove the dimmer switch. Remove the attaching screw and stud and remove the ignition switch, disassembling the actuating rod from the hole in

...dimmer switch on a 1989 Cadillac Seville What can cause the dimmer switch on a 1989 Cadillac Seville to turn on and all of a sudden not want to switch to the high beam again? Could be a couple of ...

...dimmer switch. The dash lights go out when I drive over bumps and come back on if I hit another bump. When I touch the dimmer control knob I can make the dash lights come back on until I hit another ...

...dimmer switch and/or the light switch, the instrument panel lights come on. Do you think I should replace both the dimmer switch and light switch? THANKS FOR YOUR HELP. Dan 1996 Jeep GC Laredo may be ...

...the plug on dimmer control, look for loose connector and ground, if OK, check dimmer switch resistance (brite = less oms, dim = more oms.) if no or uneven reading, replace dimmer switch. Good

...dimmer switch. It may be pulling loose a connection, just a fraction, to lose contact. You may also need a new dimmer switch. Or a multifunction switch if the dimmer switch is attached that way. The ...

dimmer switch' on your dashboard? A dimmer switch allows you to reduce the power /light to the instrument gauges for night driving. A faulty dimmer switch can cause those problems you describe (I'm in

...dimmer switch and they stay on as long as your holding back on it Hi It sounds like the dimmer is at fault, remove the dimmer switch to see if there are any wires touching inside the switch, there is ...