1999 Dodge Durango "anti theft control module 2005" Questions

...anti theft system I have a 2005 durango and the anti-theft system will not shutt off. Is there an easy way to bypass or remove? I have tried to disconnect the battery, but that does nothing. Please ...

...anti-theft system and immobilizer. It is all computer controlled by the chip in the key, the transponder in the steering column, the anti-theft module, the Body Control Module, the Engine Control ...

to disconnect the anti theft system so I can start my car Anti theft system is built into your car's Engine Control Module. It cannot be disabled according to everything I've read in the Nissan forums

anti theft code P1629 P1629 code, vehicle starts for a second and shuts off ! Any workaround to the anti theft det. system? 2005 sunfire... try leaving the key on for 5 to 10 minutes for the BCM (body

...anti theft module on Cadillac srx 2005 Vehicle Theft Deterrent (VTD) Description and Operation The vehicle theft deterrent (VTD) system functions are provided by the theft deterrent control module. ...

start due to alarm..it turns over twice then the 3rd time it wont start. any suggestions? Take it to a qualified repair shop , anti-theft system problem . Code's stored in theft system control module

Anti-theft system will not allow the vehicle to start , the bcm is configured for the other vehicle . By ignition switch ,what are you talking about ? Key part or behind there is the electrical part ?

...anti theft system what do i do? i was just wondering if i could clear this code. it came on after i started it with my remote. clearing this code will require a scan tool or a code reader capable of ...

...Anti-theft system problem ? The ignition switch on this vehicle is a input to a control module (BCM) body contol module ! This vehicles BCM functions as the Power Mode Master (PMM). Refer to Power ...

MODULE, ZKEV CENTRAL BODY CONTROL MODULE WHICH CONTROL DOOR LOCKS, WINDSHIELD WIPERS AND WASHERS,ANTI THEFT SYSTEM, INTERIOR LIGHTS RADIO ALL THESE COMPONENTS HAS TO BE REPROGRAM USING A BMW SCAN TOOL