Alpine PDX-4.100 Car Audio Amplifier "hook 2 amps together" Questions

of terminals from each sub. And take the positive from sub 1 and hook it to positive of amp. Take negative sub 1 and hook it to positive of sub 2. Take negative of sub 2 and hook it to negative of amp

...2 jl500/1's you wouldnt want to just hook them up together. Because they both have to be putting out the exact same amount of power. Which no 2 amps are ever exactly the same. Some companies make ...

2 subs together in parallel. This means Hooking the positives of both subs together, as well as hooking both negatives together. Your total resistance: Rt = (R1 x R2) / (R1 + R2) = (8 x 8) / (8+8) = 4

...hook them up with out my amp getting hot or my clip lights flashing while producing as much power as possible. and also do have to bridge the amp?? run them in sereis hooking them all up together and ...

...2 RCA OUTPUTS and the BMWX 483 4 channel has 4 OUTPUTS !! Now, what I want to do is to hook the two amps together then run them both through the BMWX 424 4 band EQ so that I can control the sound ...

2 pioneer prsx720 i would like to hook up 4 10 kicker cvx dvc subs what ohm 2 or 4 do i need or what would you suggest or recomend wiring If the subs are dual 4 ohm voice coils, you could hook the DVC

hook it up two the two chanel it works fine do i need 2 ohm subs? Are you sure you can put a 2 ohm load on this amp? Thats almost a complete short. When you put two 4 ohm speakers together in parallel

hook it up 1 way. Verify the polarity from your speaker box. + to + and - to -. As far as your impedance is concerned this amp is stable to 1.5 ohms but for this case we will assume you have two 4 ohm

...2 500 watt amps? If the speakers are rated at 500W or greater, then you'll need two amps to get their full potential. When you connect two to a single 500W amp, each speaker only gets a max of 250W. ...

...splice them all together and it should all work. or if you have a multichannel amp just hook ur factories into the amp as well. i spliced into the back 2 speakers and there is no sound to my sub!