Panasonic DP-C354 Copier "primary" Questions

e0067-0110 E067 High voltage-related error 0100 The measured current of the primary transfer ATVC is abnormal twice in succession. Check on the primary transfer roller spring, Clean the position where

Toshiba e-studio 45 We tried to change the primary but the new primary that was installed causes black spots on the copy so we return the old one. Yes, after cleaning the primary the copy is alright ...

...THE FUSER ALREADY REPLACED LASER UNIT AND DC CONTROLLER BUT HAVE THE SAME PROBLEM Pull out the primary corona. Clean it good and change the primary wire. If you still get the code, you might

...(Potential ON) E061-0002 (Potential OFF) E100-0001 E227-0004Cause The pin is broken on the Primary Fan 2 Duct. The Laser Shutter is activated by the pin on the Primary Fan Duct

pages are coming out all black Missing primary charge voltage. The drum has to be primary charged prior to laser write the latent image on it. The laser removes the charge where the toner has to ...

Where is the primary transfer on the drum The copies won't print because transfer came out The primary transfer is not on the drum it is located across from the drum as the paper goes between the drum

error code 000061-0001 A E00061-001 deal with the OPC drum potentional. Did you look at the primary charge unit? Have you replaced the Post corona wires? I would change them. Also, if you can switch ...

HP Color LaserJet CP352dn 59.fo error 59.F0 ERROR The primary transfer-alienation motor has experienced an error. 1. Check to ensure the ITB is installed correctly. 2. Run a sensor test to verify that

...error but the copier it work but the printing time its did not printing there may be problem with primary charging roller. to replace the primary charging roller, take out the drum unit, remove ...

...the whole page of the copy is black. I have already change the drum and drum blade. I inspect the primary because i change the screen but still the copy is black. There is a soot or toner on the ...