Acer Aspire 5100 Notebook "screen check" Questions

...screen and check if you can see the same problem.if it still is the same then you need to get the display replaced.you can access the setup the screen by tapping the option which will be displayed on ...

...screen and check the cable that runs from the screen itself into the main body of the laptop all in all your probably going to need a screen Hi, There is a loose cable between the laptop motherboard ...

screen, couple it back together and it will start working fine.fixing the flip? get the appropriate screwdriver, Open the laptop, check the connection from the link that assists in flipping the laptop

...screen then check the inverter if its good or not,, or try to use another inverter to test if working or not.. if the inverter is working and good. check the vga cable maybe loss only thats whya your ...

...Check the screen power saving configuration in the display properties. Point the mouse in the blank screen then RIGHT CLICK THE MOUSE in select properties then select SCREEN SAVER click POWER in the ...

...SCREEN APPEARS AGAIN FOLLOW THESE STEPS: CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK YOUR HARD DRIVE TO MAKES SURE IT IS PROPERLY ...

...screen feature is supported. Better check its documentation. Or you may opt to check it in Display Properties (Windows Platform) The way it works is you hold the Fn key down and tap the F5 key wait a ...

screen surround) and check the connections are snug and tight, also check the block connector on the motherboard. Once you are satisfied that all the connections are good, re-assemble the lid and turn

...Screen Time? Most likely. You can check the cable connection to the motherboard and check the cabel where it goes thru the hinge assy for wear, but what you describe is indicative of a hardware ...

...screen. When hooked up to an external monitor, the computer works just fine. check the display properties for dual monitor settings in display properties>settings> check all options I think it ...