Question about Antec Computers & Internet
i have a mother board with 4+4 pin atx connection but the additio additional 4 pin does not fit the female receptacle on the motherboard. Do I need both to coonect? The extra 4-pin connector should ...
...the right one. And secondly all the connections to my hard drive and DVD burner are little black connectors instead of the white connectors need to know what they are and is there a converter ...
No output supply Hello, check the power supply independently. First you unplug all the devices,like hard disk, cdrom, FDD, card reader and any other device that is attached to the power supply. Next ...
...( 2 yellow 2 black) connector from the board ( may be keyed as other NB connector. Remove the power connectors from CDROM, Floppy, Hard Disk and anything else with connectors. You should now remove ...
Question about Codegen Computers & Internet
...and I read it does not have SLI capabilities. so I believe no is the answer, sorry. Features Connectors 1 x Main connector (20+4 pin) 1 x 12V (P4) (8 pin) 7 x peripheral 1 x SATA 2 x ...
Question about Tenma Computers & Internet
what kind of connector do I use for the remote sensing connection? It says 22awg but the connector has a single hole next to a flat rubberized hole. Inserted wire comes out easily, doesn't grip, must ...
...have to replace the power supply. If the readings were correct, you should check the P8 or P9 connectors at the motherboard. These connectors may also be named P4 and P5. To check these ...
I'ld need the pinout of 20pin connector. Thank The 20 pin connector is a reduced 24-pin connector, omitting pins 11, 12, 23 and 24. (as though they were just sliced off the end of the connector) There
Question about Bestec Computers & Internet
light on back is soild green but computer does not turn, but if i jump pin 16 and ground i get the power at the plug and computer does power up that atx connector is faulty it becomes loose because of
Question about E-Machines Computers & Internet
flashing green light on back of power supply no power to unit. You can check the power supply independently. First you unplug all the devices,like hard disk, cdrom, FDD, card reader and any other ...
8 questions posted
Usually answered in minutes!
3,409 Questions
2,234 Questions
1,799 Questions
796 Questions
724 Questions