Universal Remote Control GE174Universal Remote Control "number 2 work program" Questions

...2. Use the number pad to enter 2 digits for how many minutes to use forthe timer (01 to 99 minutes). The light will turn off and start timing.3. Make sure the remote is pointing at your device.4. To ...

2. Note the # on the bottom where it was Secondary Remote Address. 3. Hold SAT until all buttons on top of the remote light up. 4. Let go and while it's blinking enter a number between 1-15 and press

...number one to work with TV 2 depending on the type of remote you have. The remote must be UHF in order to work TV 2. It will be my pleasure to further look into this for you and get you a new one. ...

...2. Use the number pad to enter 2 digits for how many minutes to use for the timer (01 to 99 minutes). The light will turn off and start timing. 3. Make sure the remote is pointing at your device. 4. ...

...number. now the remote control is not programed to my TV and since I lost the programing instuctions I have no way to reprogram the remote control. If you can send me a copy of the programing ...

...2. Note the number on the bottom by Primary Remote Address/Secondary Remote Address. 3. Hold SAT until all lights turn on on top of the remote. 4. Enter a number between 1-15 and press #. 5. Press ...

CHANNEL SELECTION HOW CAN I ENTER BIGGER NUMBERS ON THE REMOTE? IT WONT LET ME DO 2 NUMBERS. ANY SOLUTION? THANKS Thy Resetting the Remote and Re-program your devices. See if that works.

...2. Note the number on bottom by Second Remote Adress 3. Hold SAT until all lights on top of the remote light up. 4. Let go and it will be blinking, enter a number between 1-15 and press # 5. Press ...

...number of your RCA universal remote. 2. You must search RCA.com for it or else google.com for "[model number of RCA remote] + operating manual" Ignore all those who listed codes.. they have no idea ...

...2. While keeping the corresponding Source Button pressed (like TV, VCR1, VCR2, DVD, etc.), enter the 4 digit code for the device using the number buttons. 3. Release the component button, then press ...