Question about Dell PowerEdge Computers & Internet
...RAID 5 or any similar technology then No Chance. And you must Launch the "Rebuild Array". If you have errors while Rebuilding: I would suggest updating the firmware on the remaining drives as there ...
Question about Dell PowerEdge Computers & Internet
...to a known working snapshot and then clone the VM. If you mean you have a faulty physical drive in a raid 5 just replace the drive and the raid will do the rest. Otherwise I'd say just rebuild the
Question about Dell PowerEdge Computers & Internet
...RAID systems fail if you lose more than one drive, so I'd replace that drive ASAP. The beep tone(should be continous) you are refering to is that of a failed drive Usually the perc card will emmit a ...
Question about Dell PowerEdge Computers & Internet
...RAID controllers are expandable. You need to check with your manufacturer. If so, plug in the drive, boot to the cotroller configuration and follow the manufacturer guidelines to expand the array. ...
...Prasad Is this hard drive in a RAID set? if it is, you will need to replace it with the exact same drive. After you do that, you will need to go into the RAID controller bios and initiate a
...Rebuild and or Resync the array. If boot record errors occur, you have to boot from CD/DVD and repair the Boot Record and/or MBR. If you need any other issue like BSOD, please write them down. Make ...
...RAID 5 will be fully functional again. While one of the disks is faulty or missing the two remaining disks will continue to work, but at the severely degraded performance. After the rebuild the ...
Question about Dell PowerEdge Computers & Internet
...event viewer which will tell you of any errors in the computer - your raid configuration will be one of these errors. If you view the error it will tell you which drive and allow you to rebuild it ...
RAID controller reports Disk 4 "is not ready" (no amber light) but it does detect it on controller initiation. I need to find out if I must rebuild the array, and if so, might anyone know how? I don't
Question about Dell PowerEdge Computers & Internet
...RAID should rebuild. If it is not degraded. I would turn the server off for a sec remove all the drives and blow out the RAID carriage. I tend to do this anyway on our servers every quarter to keep ...
117 questions posted
Usually answered in minutes!
139 Questions
98 Questions
37 Questions
27 Questions
25 Questions