Dell PowerEdge 1600SC Server "press f1 boot" Questions

No Boot device available Press F1 to reboot Computer not recognizing the hard drive. Look in BIOS to see if hard drive is listed. Reload system disc/CD.

my dell power edge is not booting everytime it is asking to press or F1 or F2 but still doesnot reboot perhaps your hardware isnt correct setup in BIOS or some of harddrive not working correct

...Press F1 to continue F2 to setup. i have set the Boot sequence 1- cd room 2- Hard Disk 3- fdd. all Drives on machine are scsi. The os cd that I enter is Bootable and working fine on other machines. ...

...Press F1 to reboot or F2 to setup" Please why? Did you experience a power event? Go to BIOS (F2), and make sure that RAID is Enabled. If RAID got turned off (power event, BIOS reset), then it will ...

...f1 to retry and f2 for system setup we change the hard disk but problem is still kindly suggest optios for our system thanks abid i replaced one of the hard drives in my poweredge. how do i get it to ...

...Press "F1" key to continue 2- "F10" key for System Partition Utilities The problem is that the server stop the booting process at this menu and I have to manually press F1 to complete the starting ...

...boot order in BIOS). Some prosesses occurs then asked F1 FreeBSD F5 Drive 1 When i pressed F5 nothing happens, But when i pressed F1 is asked me for logging and password. I don't know the loging name ...

A boot message "SCSI bios A boot message "SCSI bios not installed" . pressing f1 continues and loads SERVER2003. How to get rid of message ? Disable the SCSI controller in the BIOS.

...due to possible data loss. Press F1 to continued with drive disabled. Press F2 to accept data loss and re-enable logical drive." Replace the HDD whose led is blinking in AMBER ( orange )

...serial number, enable.disable memory banks Boot the system Press F1 to enter the Configuration/Setup Utility to change bios settings, i.e model/type serial number, enable.disable memory ...