Dell PowerEdge 1600SC Server "hard" Questions

...Check Media cable PC is not booting. The error PXE-E61: Media test failure usually means the hard diskhas failed or the hard disk needs re-seating or the disk controller is faulty. First - ...

Problem with the Dell PowerEdge 2650 Server Can't detect Hard drive First - re-seat the harddisk and reboot the computer. If this does not work then reboot and go to theBIOS configuration to see if ...

...much! Best regard! Check both the POWER and the DATA cables between the motherboard and the HDD (Hard Disk Drive). Remove them, and then re-insert them. Try connecting the DATA cable to an ...

dell server cont detect hard disk dell server cont not detect hard disk after booting it will give you no boot device found chk for boot sequence in the BIOS and chk the hard disk is detecting in the ...

why the hard drives are not detected, and when accessing controller from the BIOS no hard drive found only DVD drive ? Hard drives are HP 1 TB 7200 RPM SAS and controller PERC S110 . Duplicate ?

Dell PowerEdge 1400SC Can not locate hard drives or partition I am trying to reinstall the operating system on a Dell PowerEdge 1400SC, however once the windows set up starts It alerts me that no ...

can't detect Hard drive Hello,Be sure to check your cable connection both at the drives and the motherboard. You may have to swicth then out with known good cable. If you do use new cable and get the ...

i need to get working non dell harddrives Hard drives are hard drives. They will work in any computer.. Attach the Hard drive you want to access as a slave or secondary hard drive to your existing ...

Why the hard drives are not detected, and when accessing controller from the BIOS no hard drive found only DVD drive ? the Hard drives : HP 1 TB 7200 RPM SAS ,controller : PERC S110 You need to access

E Machines I have restored the system hard drive from the hard drive backup copy. Prior to "restore", the computer was in a"loop" and would not boot after the Windows icon came on screen. Now, after ...