Panasonic Lumix DMC-FX9 Digital Camera "button" Questions

How do I set the time and date on a Panasonic DMC-LZ4 1. Press the menu/set button. This will bring up a menu. 2. Press arrow left (the button left of the menu/set button). 3. Press arrow down (the ...

...the camera on as if you wanted to take photos. Next, on the back of the camera, press the center button marked "MENU/SET". Press the left button to select the icons on the side. Press the down ...

DMC TZ3 all buttons blocked I got a Panasonic DMC TZ3 Firmware 1.0D Worked fine for over two years. Last weekend after taking some photos, all buttons stoped working. The lense will still open and the

LCD showing "remove len cap and press reset button" always When I turn on the camera it's stuck where it said "remove len cap and press reset button" when I followed that instruction meassage keep ...

...about 2 years old. The issue I am facing is that when I used to click a picture I had to push the button down slightly and when a green icon appeared on the screen the picture was composed. Then I ...

Panasonic TZ3 - buttons wont work The camera will turn on, the shutter will open up and the LCD will update as I turn the wheel through the different modes, but none of the other buttons (menu, zoom, ...

...a relitavly cheap SD card. They are ridiculously cheap these days. Often you just have to click the button to view your photos/videos and then you delete them by clickign a delete button with a trash ...

What would cause the shutter button hard to press? I have the same problem. The button feels like it won't press. Then as you give it more force, it suddenly goes. After that the camera works normally

Hi, I have an FZ7, so the following may or may not work with the FZ8: Turn on the camera. Press the button labeled "MENU SET". Then press the left arrow button and the down arrow button. Now press the

Reset button on a Kodak Z981 looking for a reset button There is no reset button on the Z981. There is a "Reset Camera" command in the Setup menu, as described toward the bottom of this ...