2005 Buick Rendezvous CX "sebring pcm" Questions

Ad

...PCM on the Sebring coupe and Avenger models - the Crankshaft Position Sensor is located: under hood, driver side, upper engine area, mounted on end of engine block Fig. 4: Location of the crankshaft ...

Ad

Sebring Conv. 6 cyl with an error code of P 1296. What does that error code mean ? CODE P1296 - 5 VOLT VREF SUPPLY NOT PRESENT - POSSIBLE CAUSE MAP SENSOR VREF CIRCUIT OPEN BETWEEN THE SENSOR AND PCM

Ad

Question about Buick Rendezvous

1 Answer

2004 sebring 24 no fire no codes new pcm 2.4 4cylinder. New programmed PCM installed. has power to coil but no spark on turnover. You have power to coil but do you have the pulse's needed for the ...

...Sebring Conv Engine Light On code P0610 PCM data configuration error you can pick up an OBD reader from most pats stors for about 50 dollars and reset it but if it continues to come back on you may ...

...sebring convertable located and if tin the PCM where is it located My multimeter is showing an out put of 19.45 its in the alternator, the pcm is right behind the drivers headlight, its rectangular ...

Question about Buick Rendezvous

1 Answer

...sebring? P0513 stands for invalid SKIM Key. Basically it means that the "computer chip" that is in your ignition key which has a special code is not recognized by your vehcile compter (PCM). In most ...

...sebring? The PCM (Powertrain Control Module) is the aluminum box with fins that is behind the left headlight and toward the engine a bit. It's about 12" long 6" high and 2" thick and runs lenghwise ...

Question about Buick Rendezvous

1 Answer

...sebring failed nj inspection - obd code p0601 - how to fix? A code P0601 in most cases means the PCM has gone bad. This is possibly due to a short-circuit inside the PCM. Or, if you disconnect the ...

Question about Buick Rendezvous

1 Answer

...Sebring. OBD2 says it is a code PO340, can you help? DTC code is P0340 no cam signal at PCM. Chrysler always used to say replace the cam and crank sensors together..wouldn't pay our warranty time at ...

...sebring I am getting OBD II codes of 40 and 41,Transmission & engine module,any suggestions where to start? Thanks. code 40- Possible causes - 1/1 And 2/1 O2 sensors harness circuit shorted - 1/1 ...

Not finding what you are looking for?
2005 Buick Rendezvous CX Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...