Question about Harley Davidson Bullet 125 Motorcycles
...wire-type feeler gauge. Bend the outside of the electrode so that only a slight drag is felt on the gauge as it passes between the electrodes. The proper gap measurement is 0.038-0.043 in. (0.97-1.09 ...
Question about Harley Davidson Bullet 125 Motorcycles
...install a good ground. Use a very flexible wire, at least #14 or heavier, stranded or woven NOT solid. Fasten the new ground onto the metal case of your radio - make sure you don't create any shorts. ...
Question about Harley Davidson Bullet 125 Motorcycles
I have a 2008 Yamaha V-Star 1300 and I am in the process of installing a light bar (OEM). It states to "Splice the included black wire to the black headlamp ground wire" The black wire on ...
I have installed the custom auxiliary forward lighting kit on my street glide. I have followed the wiring installation instructions to the T and the problem is that the head light and the auxiliary ...
Question about Victory Motorcycles
99 victory v92 I'm installing a new battery but am confused on which one is the ground wire. .can someone please help .Which wire is the ground?thx...jenna On most systems, red is positive, and black ...
...assuming the solenoid has 4 wires connected to it. When you reconnected the wires you most likely installed a wire on the wrong terminal, or the new solenoid is defective, and has a terminal
Question about Harley Davidson Bullet 125 Motorcycles
the dragonfire cdi?I can touch a ground wire and have fuel.replaced all relays and checked fuses.now what? Wire a permanent ground to bike or if this leaves pump on always then install a switch inline
...to the coil there's some insulaters in nwhat order do thaey go The idea is that the wire does not go to ground when the points are open. Install the insulators so that the wire does not go to
Question about Harley Davidson Motorcycles
im installing wiring harness on my 1978 shovelhead. the leads going to tail lights turn signals and brake lights are all positivives, no ground wires. do I run my own ground wire? Hi, William your ...
Question about Harley Davidson Bullet 125 Motorcycles
install went smoothly and easily until it came time to plug the ground leads into the wiring harness. I cannot find the proper connectors in the headlight or horn / turn signal wiring harness to match
64 questions posted
Usually answered in minutes!