Insignia D400a PC Desktop "power connection tower mother board" Questions

...Tower with a standard power supply Maybe you put the wrong jumper of the power jumper for the front panel. Explanation: You can see the switch to turn on the PC right, then make sure that switch ...

...tower and have hooked up the mboard to the power supply when I hit the power button nothing happens I do have power to the supply so I believe it is working but nothing going. Does anyone know where ...

power source, are all connections good and switches on. Assuming so, are there any led's lit anywhere on the tower when you turn it on or any fans turning other than the PSU fan. If there are no fans,

...connection, (only) Try to power on computer. Note..... If you still have the Yellow light, Replace the supply. In some cases, the power supply sees a fault and fold back to a protection mode. The ...

tower powers up but monitor says "no signal" keybord and mouse doesnt work ???? Does the keyboard initialize? If it does, (the caps lock/num lock lights flas, then the system seems to be working. In ...

...tower to the power cord it shows that mother board is functiong normally so no problem with the mother board .try this steps so that it may resolve the issue. 1. No Boot: . Check the cables . Check ...

...tower, on the mother board you will find the RAM card approx 6 inches long, take out the card and restart the comp, you should get the beeping sound and the mother board is fine, if no beep that ...

...flash, etc. but no startup with any CD I think that you need to open your tower and try to reconnect your cable from the mother board to the cd player. looks like only the power cable is

...power it on. tower will not boot up when i try to power it on. no indication of power light or power coming on. Hi have you check the AC source to see if there is current flowing in from the outlet, ...

...and look on the mother board. you should see a large watch battery. remove it for at least a minute to 5 minutes then replace it. close the tower and power back up. this should remove the