NAD S300 Amplifier "preamp volume" Questions

...ON and the preamp attentuates the signal with a volume control. Try it with a signal that fades in slowly so you can intervene if it gets too loud. If it's full ON a preamp will control its

...preamp? About to put this up for sale and tried it out but couldn't get any volume out of my turntable yet got volume out of a CD player I connected If your amp has a jack labeled phono then you have ...

Onkyo Amplifiers & Preamps need onkyo integra P3099 volume control Hi ,try cleaning your volume control ,here is a video so you can DIY or contact your local service. :)

...preamp 1020 A and the volume control dont work well. How can i get this part? Claude you dont need to replace it just open it put a drop or two of cleaning oil in volume control and it should work ...

volume setting on the preamp. So it actually works, it's just that the "4" reading doesn't change. There's probably a pin you can short somewhere to make that default to "10" which would be ideal. But

volume of the preamp worked and when I cranked up the turntable, the volume was low going through the preamp You must connect the turntable to the plugs on the left side of your amplifier when you are

...volume controls are always running full out. There is usually some form of preamp, control amp or receiver before the amp to provide source selection and volume (*) as well as any other signal ...

...preamp out" jacks which are tracked with the volume control on your receiver. This is what you're supposed to use. However, if you don't have this feature, you can use the headphone jack on your ...

...preamp, as it's volume control would not affect the Tape Output, so the output would be at maximum volume. If your scheme involves an amp that has it's own volume and other controls, it would

...preamp and the volume is stuck on high. I turn the volume knob but it does nothing. Any suggestions? Looks like you are going to have to replace the potentiometer, AKA volume control. It must be ...