Question about Mitsubishi Televison & Video
...troubleshooting code is 2-4 1 blink-then 2 blinks-------no error 2 blink-then 1 blink-------X-ray protection 2 blink-then 2 blink-------SHORT PROTECTION******* 2 blink-then 3 blink---------deflection ...
Question about Televison & Video
...3 blinks is short protection and means convergence issue or short.5 blinks is short on 140 volt line--shorted sweep transistor and or c 509 bad.This set has a Light box--easy to remove entire chassis ...
...3 blinks, pause, two blinks. It is getting warm so I think it may be a fan problem, but I'm not sure. Is there a way to find out what error this blink pattern indicates? The blink pattern does ...
Question about Mitsubishi Televison & Video
...Troubleshooting - Stereo & Video ... www.stereoandvideorepairco.com/.../MitsubishiShutdownTroubleshootin... For example, the sequence: blink-blink, pause, blink-blink-blink, indicates an error ...
Question about Panasonic Televison & Video
...blinks 3 times. Is it time to change the lamp? Thanks for your help. Its not the lamp thats faulty but I think its the ballast(lamp's power supply). 3 blinks indicates that there is something wrong ...
Question about Sony Televison & Video
...blinks 5 time while watching it. Is there any way of ..... 2006 that willnot power on and the green LED is blinking 6 times. We had a service ... Sony KDF E55A20 - 5 Flashing Read Lights - TV Forums ...
Question about Philips Televison & Video
...blinks followed by a pause of 3 seconds, 1 long blink of 3 seconds to finish the sequence. The L.E.D. code indicates a fault with your 5v d.c. power circuit. The circuit board will have to be ...
...blinks to black but the sound is always OK. It can go several minutes without a blink and then blink 3-4 times. It happens so often the TV is not usable. The power supply or there is a fault in the ...
Question about Sony Televison & Video
...3 and 6 of CN44 on the H4 board. This overrides the protection circuits for troubleshooting. Do this right after turning the unit on and as soon as the lamp is seen lighting. Check pins 2, 5, 8, and ...
166 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions