Question about Sharp Aquos Televison & Video
...Its not designed to push out sound from an hdmi cable. The BEST way to have this setup is to run your sound directly from the cinema to the external audio source(leaving the hdmi cable in the
...hdmi cable to hook up divx dvd player. heard a small pop and smelled burnt rubber on hdmi cabe(dynex). returned cable,was convinced to buy monster cable but T.V. hdmi input is not recognizing this ...
...i 800-237-4277. Perhaps you forgot to set the HDMI sound on your Sharp TV. On your Sharp remote, press: 1. MENU 2. OPTION 3. HDMI SETUP 4. AUDIO SELECT 5. select DIGITAL I'm having the same ...
sharp aquos no sound on hdmi What is connected to your HDMI cable? Some devices do not send audio down the HDMI cable.
...HDMI sound on the input of the TV that you are using. Try another HDMI cable. It may be defective. It is also possible that there is a compatiblity problem for the HDMI sound between the TV and the ...
...HDMI cable but it still want work. I tried another cable but i keep the problem. No picture no sound. Anny suggestion? sounds like your TV is not compatible to ps3..or you can try to adjust your ...
Question about Sharp Aquos Televison & Video
...hdmi cable to my laptop with a vizio hdmi cable and the tv says not format... how do i address this issue The input which you are using sounds like a USB port (which is looking for a virtual drive ...
Question about Sharp Aquos Televison & Video
hdmi cable. When running a movie on blue ray I am getting surround sound. When using tv only I can only get sound from tv speaker. Where do I look in the manual to fix this problem? optic cable should
Question about Sharp Aquos Televison & Video
...sound on TV Used HDMI imput 7 tried imput 6 with hdmi and audio imput from PCF to TV still picture and no sound any suggestions Hi Scott, On your PC, you'll need to go into the Control Panel --> ...
...HDMI cables. However when I use older style RCA cables (white/red/yellow) I get SOUND but not PICTURE. I confirmed that the "AUDIO ONLY" function is set to "ON" but the problem persists. Any ideas? ...
291 questions posted
Usually answered in minutes!
878 Questions
339 Questions
295 Questions
241 Questions
163 Questions