Question about Sharp Aquos LC-37G4U 37 in. HD-Ready LCD Television

1 Answer

Sound, but no picture

I have a Sharp Aquos LC-46D 92U and all works well when connecting auxiliary items such as a DVD player or a digital video camera using HDMI cables. However when I use older style RCA cables (white/red/yellow) I get SOUND but not PICTURE. I confirmed that the "AUDIO ONLY" function is set to "ON" but the problem persists.
Any ideas?

Posted by ctr1879 on

  • Anonymous Nov 21, 2007

    have exactly the same issue - have had our 32" for 13 months, when you turn it on, we have the picture for 5 secs then nothing just sound. would like to avoid having to call out an engineer... Any ideas?

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

The hdmi inputs on this unit go directly thru the main digital pcb. and the component inputs feed thru the av pcb then to the main pcb. If the composit hook up do not work and hdmi inputs do work the unit has a bad AV pcb.

Posted on Feb 05, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have connected a Roku Digital Media Player to Sharp AQUOS TV, I am able to get the video but no audio from TV, Audio cable and all are setup properly. Can anyone suggest me? also i see the same problem...


Use the HDMI cable on the Roku. The reason you don't have audio from the laptop is because the HDMI out on the laptop has no audio on it. You need to use a 3.5 mm audio cable to connect the laptop audio to the TV.

May 26, 2011 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Sharp Aquos 46" HDMI problem


I have a similar problem. The Sharp TV aquos appears to be shutting down my blue ray player and dvd recorder when connected via HDMI. They work fine and never close down when I connect them via the rca cables either single video connection or a composite 3 cable rca lead. I have 3 HDMI inputs on the tv and the problem occurs on all 3. Any suggestions?

Jun 16, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Sharp Aquos LC-37D44U only shows B&W images from DVD & VHS source


First thing- why not just use the HDMI instead of standard def cables in the first place? Anyway- If the RCA-video (yellow composite cable) is not producing color, 1 of 2 things may be wrong: 1. You accidentally connected the a/v cables [yellow white and red] to [red green and blue] component inputs or vice versa, or.. 2. Your TV or DVD player is somehow set to the wrong video format. Check the DVD settings for video output format and video connector type. Format should be NTSC, and connector should be composite and/or s-video for the cables you're using.
If this is only happening when connecting the DVD player through the VCR, then check to make sure the same cables connecting the DVD player to the the VCR are also connected to the TV from the VCR.
BTW- if this is just to record DVDs to a VCR, I'll tell you it's not worth it. If your DVD player has an HDMI port, your picture quality will be so much better than if you're watching a VCR copy of one. Your new HDTV will look worse than an old standard def TV. Worse; I'm not kidding.
I hope some of this helps.

Jun 01, 2009 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Sharp Aquos LC-46d65U HDMI connect


First off a little tip that manufacturers don't tell you is that you HAVE to TURN OFF the POWER to ANY UNITS that you are Connecting to via HDMI!!!!!!! If not you can short out the Inputs!!!!!!!! HDMI is usually Automatic, But sometimes you need to go into the Menus on all Devices to the HDMI section and write down their settings and compare them. Any definition that you are not sure of check the Manual or Google it! Match all the Settings (there won't be Much!) Hopefully the Inputs were not Damaged it only takes one time to short it out and then the Repairman makes a few bucks! Good Luck!

Apr 02, 2009 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Sharp Aquos TV will not display contents of DVD using Microsoft Media Player 11


it sounds like a problem within your vga connection on the tv check around and see if there is some firmware for this fix or right click on your desktop were there is no icons and select properties select settings tab and set ur display as needed.

C

Oct 24, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Help


Best would be hdmi next would be component, both can carry 1080p signal, but hdmi beats component as it can upscale to 1080p.

Jan 21, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Aquos L-46D43U


try this 1st theres a setting on your dvd player. try to play with it a bit if that doesnt work. look at cable your using. If your using a Component cable you might have switched them wrong. if still that doesnt work try other forms of cable like S-video or HDMI or just plain Composite Video.

Jan 21, 2008 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

Not finding what you are looking for?
Sharp Aquos LC-37G4U 37 in. HD-Ready LCD Television Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6120 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...