Toshiba 36AF53 36" TV "remote working reciever" Questions

10 year old 35'' Zenith TV will not respond to an RCA remote control. What code do I enter in order for it to communicate? these codes are built and programmed into the remote and directly into the ...

...reciever or microprocessor for it have pooped out. It's something that would have to be serviced by a shop, but due to the age and size it would likely be cheaper to replace the whole TV. Try using a ...

remote for it. When i got home i hooked it up to my Direct TV reciever, and when i turned my tv on it is on VIDEO mode. How can i get it off of that mode? You will need a univeral remote, and the code

Remote not working Could it be the remote? Replaced batteries and doesn't work. Should I order a new remote or could there be something wrong with the TV? The TV works manually but not remotely. I ...

...remote start working. When I had cable remotes TV did respond to those remotes now that I do not have such service no remote seem to work. I HAVE HAD THE REMOTE RECIEVER INSIDE THE TV BAD IN THE ...

...REMOTE NOT WORKING I TRIED THE SWITCH ON TV IT DID NOT WORK VOULME SWITCH ON TV WORKED TO TURN TV ON WHILE WATCHING TV THE MENUE COME ON BY IT SELF AND TV GOES MUTE CANT TURN TV OFF WITH REMOTE OR ON ...

tv does not recieve remote control signals. but manual controls on tv work fine YOU NEED A NEW REMOTE RECEIVER IN THE TV der is something wrong inside that tv related to that remot sensor, better try ...

...working. if not remote .. I have seen alot remote recievers fail inside the set. and it was mostly due to standby voltage failure .....pinpoint? get a shematic and check reg. ic and zener diodes... ...

haier 20inch tv without original remote, universal wont work tried to program the tv with an rca universal remote, used the only code that was listed - 1034 which did not work. now on the screen it ...

remote not working REMOTE IS PERFECT BUY TV NOT RECEIVING THE SIGNALS try to make sure you have batteries in the remote, then try to clean the recieving part of the tv (should be next to the tv's ...