Breville CT20 Retro Classic 2-Slice Toaster "toaster magnet holding down" Questions

...toaster down, and onto the contacts that supply power to the magnets ant elements. Removing the cover was the trickiest part - my machine had screws with triangular holes in the heads that a normal ...

toast won't stay down when handle pushed down handle comes up immediately as if not plugged in. Plug definitely in. Used only 3 times. take it back. sounds like the magnetic coil that holds the handle

...down. Can I repair this easily? I have cleaned the toaster and no crumbs or large pieces seem to be in the way. it sounds like the magnetic coil which holds the lever down to the toast position has ...

...toaster stays down with an electro-magnet which for some reason has decided to stop holding down the weight of the springs within the kitchenaid toaster. This really is a shame considering I bought ...

...toaster: The toast carriage is held down by an electro-magnet, not by any type of physical clasp or hook. I looked at *so* many websites and consulted a coupld of hard-bound fix-it books, and neve ...

...toaster & would like to use both sides. Energized coil (Magnet) which holds down lever mechanism may be coated and in need of scraping for it to make full contact the element is broken . Try to put ...

...toaster works is the board sends a voltage to the electromagnet that holds the "works" down until the desired time or temperature has been reached. The transistor is in series with the magnet and I ...

...toaster cover up to fix the level bar problem, I encountered another problem! :( The handle didn't hold down when I pulled it down to toast! It maybe due to something wrong with the electric-magnetic ...

magnet that holds the lever down. Clean it out thouroghly and see if it starts working again. As far as who would work on this, most small appliance repair people will do this but as far as costs they

...down. I opened up the toaster and both sides of the loading mechanism appears to look the same. they look well lubricated, no crumbs stuck on the mechanism. what else can I look for to solve this ...