Sharper Image SI695 AM/FM/TV Radio "reset button clock" Questions

...reset button then press it to reset,but if you can't find the reset button,then take it out the power the nicad battery for about 30 minutes. After 30 minutes put it back the battery and power it on ...

...button with the "set" notation underneath it. The hour will flash. "Reset" the hour by using the tuning buttons, as you would if the radio were new, and then change it back to the correct hour. Press ...

CLOCK button, press and hold the POWER button * hold both buttons for 5 seconds until the clock in the display blinks and resets to 0:00 That's it. --------------------------------------- Para cambiar

Re: setting clock and stations I cannot pre-set clock or stations on my TEAC MC-DX30, please help. Is there a reset button on it

...If set does not come on when the On-Off button is pushed or comes on and immediately turns off - depress the 'Reset' button a couple of times and then reset the clock and try the On-Off button

...stations when I changed the battery and I have no clue how to reset them. Have tried all logical ways. Thank you Sony ICF-M350V Tune to desired station. Hold Clock/enter button. Press a preset

...button down for two or three seconds and confirm the reset when prompted. Instructions for Sensia: Make sure your radio is switched on. Tap 'Settings', tap 'Update' and tap 'Factory Reset'. Confirm ...

...reset) by hitting the power button. Now long press set until it begins to flash 12:00. COUNT the flashes until the 26TH flash and hit BAND. It doesn't always work, but you'll know it does when the ...

reset my clock. all the buttons seem to be locked. Hi. I have a different Jwin model radio to yours, but they might have this in common: is there a 'hold' button on yours? If so, this is used to 'lock

...button to get to the time settings, go across to get to hours / mins. You can adjust these by turning the dial for both hours AND minute settings, otherwise when the power is turned off and on again ...