Rotel RMB-1095 Power Amplifier "blown" Questions

I have a Sony ta-ax335 fuse blown replace and now no sound Replace fuse cause it was blown and now no sound Most likely, you have DC Offset, meaning a blown amplifier. If you're interested in ...

...loaded and working room is very tight. Thanks. Bryan If you overvoltaged it and the fuse is not blown, i would check for blown capacitors. Capacitors are supposed to have a flat top. If its blown ...

OLD. THE HORN IS MAKING NO NOISE AT ALL. JUST CURIOUS IF THERE MAY BE A WIRE LOOSE. IF A SPEAKER IS BLOWN WONT IT MAKE NOISE LIKE DISTORTION OR HISS? If a speaker is "blown", there is normally an open

...hand Sherwood amp but on arrival I couldnt get it to produce any sound ( I think both channels are blown). The power button lights up but having checked the speaker selector, balance input selector ...

...onkyo m-501 power amplifier unplugged with nO power cord connected,,after checking for any internal blown fuses, inspect circuit board for burnt resistors or blown caps, the resistors will appear to ...

amplifier do not have sound. E-mail: [email protected] You may have blown the inline fuses for output sound. Amps have alot of fuses under the hood. take the amp cover off and check all fuses are not

Channel A on my PMP 1280s is blown I plugged an monitor into Output A while in bridge mode. Found out after that was a big mistake. Ok so I checked the fuses and they all still worked. None were blown

ka5010 amplifier dead unit dead. 2.5A 250V fuse blown inside unit.R88 and R62 fried. R88 is situated next to Q24.can you help jamycor possibly transistor Q24 may be faulty,replace Q24 plus the ...

signal coming through but distorted blown outputs or blown fuses are usually the cause

...sound out of the right speaker. New speakers and wires so that is not the problem it sounds like a blown channel in the amp.open the amp and see if there are any fuses that might be blown.it might