low oil sensor With the Sandy bearing down on the east coast i need to get my Coleman PM0435001 generator running. It wont start. How can i disconnect the low oil sensor? By the way there is plenty of
Question about Electrical Supplies
...low oil sensor aan a digital inverter generator Look on the engine block . There should be a wire on it to the engine ignition magneto.If the engine runs the low oil sensor is not the problem. If the ...
Question about Electrical Supplies
low oil switch? It ran before we changed plug and oil, now it won't start. how do you reset or check the low oil off switch? Nancy, If you think this is the problem, simply unplug it. See links below.
...low oil level sensors that are quite fussy about their orientation. If there are any inclinds a generator is sitting on you can get FALSE low oil level shut downs. You must make sure the generator is ...
...low oil level sensor. The Subaru / Fuji Heavy Industires EH and EY series engines seem to be very sensitive to oil level. I can tell you from owning one myself and from my 40 years of experience. I ...
...low oil level sensor that will ground the spark if the oil is low. If you have filled it to FULL with oil and still have the problem disconnect the low oil level sensor (one wire) and check for spark ...
...low oil sensor on them that will not allow the unit to start if the oil is low or the sensor goes bad. If yours has one you can briefly disconect the sensor wire and try to start it if it starts you ...
runs for awhile shuts down and will restart but will run awhile and shut down Check your oil, you have a low oil sensor on your unit and if the low oil sensor will shut the engine down,
Question about Electrical Supplies
...low oil switch not working right Sounds like your low oil level switch isn't working. Try this: Unplug the two wires from the oil sensor, making certain the wires don't touch anything, and try ...
...Low Oil" sensor and if the oil level is low you will not see any spark. If after you install a new plug and you still do not have spark... un-hook one wire from the low oil level sensor and check ...
47 questions posted
Usually answered in minutes!
22 Questions
14 Questions
15 Questions
11 Questions
2 Questions