Kenmore Elite 45986 Front Load Washer "multiple 6 twice 2" Questions

multiple breaker resets. So, I was stuck with water in my unit when trying to do this. And, if it isn't obvious, don't remove the drain filter unless you have something to catch ALOT of water. Luckily

...multiple times to clear suds in the system, but still received the F02 error. Sometimes the SUD error message came up, but not consistently. I ran the built-in Diagnostics tests. It made it to C:06 ...

multiple resets or errors during a wash cycle it will go into this error mode. Possible causes/proceedure: 1. Unplug washer or disconnect power. 2. Check wire harness connections to the MCU, the motor

multiple resets or errors during a wash cycle it will go into this error mode. Possible causes/proceedure: 1. Unplug washer or disconnect power. 2. Check wire harness connections to the MCU, the motor

multiple resets or errors during a wash cycle it will go into this error mode. Possible causes/proceedure: 1. Unplug washer or disconnect power. 2. Check wire harness connections to the MCU, the motor

multiple times and showed an oL (overload) error code. It had drained but laundry was still sopping wet. There are no clunky sounds or signs anything was off track and the laundry is not bunched up or

6. Check drain pump. 7. Check the pressure switch. 8. Verify CCU operation by running a Diagnostic test or any cycle. As far as the F35 i dont see that code for your model on the sheet plz verify this

...multiple times and had technicians come out to clean it. But it did not help. I ran the cleaning cycle with bleach, left the door open ALL the time, purchased the HE cleaning tablets... and so on.. ...