Kenmore Elite 45986 Front Load Washer "he3t door leaks" Questions

Ad

Question about Kenmore Elite Washing Machines

2 Answers

...HE3t water leaking out the front door and couldn't find anything wrong. He said it was probably because we were not using the right detergent. Have to use the HE3 approved low suds detergent or the ...

Ad

Question about Kenmore Elite Washing Machines

1 Answer

HE3t door leaking (Model 44936)?? I have a constant dripping/leaking from the bottom of the door; it runs down the front of the machine to the floor. It appears that water is running under a deformity

Ad

Question about Kenmore Elite Washing Machines

1 Answer

...HE3t slowly fills with water. Water seems to be coming from grey rubber gasket around door. (There's a little slot where the water is dripping from.) This is very sporatic; I can't find anything that ...

Question about Kenmore Elite Washing Machines

1 Answer

...HE3t and increases with time. However, I tested with tissue paper and everywhere inside the drum is dry and I cannot find any apparent source of leakage. Can you help? That's because the water fills ...

Question about Kenmore Elite Washing Machines

1 Answer

...HE3t I did a load of wash yesterday. It was a large delicate load. In the middle of the wash cycle water began to pour out of the bottom. At first I thought the door was not shut but realized it was ...

Question about Kenmore Elite Washing Machines

2 Answers

...HE3t front loading washer has a rip in the tub seal therefore the washer leaks water. I looked at sears parts and I think that the tub seal is called the bellow but I can't get through to anyone at ...

Question about Kenmore Elite Washing Machines

1 Answer

...HE3t washer. It fills up with too much water and then flashes F and H, back and forth. The water is showing in the window, it is about 1/5 of the way up the glass front. I turned the washer off, and ...

Question about Kenmore Elite Washing Machines

1 Answer

door gasket for the kenmore elite HE3T A lot of concerns have been raised about door bellows molding, mildewing, and/or ripping and needing replaced. A replacement bellow isn't cheap (prices vary, but

Question about Kenmore Elite Washing Machines

1 Answer

...He3t - the washer leaves alot of lint on dark clothing. Is there a lint screen I should be cleaning? If you experience a problem where the washer does not drain properly or the drain pump makes ...

Question about Kenmore Elite Washing Machines

1 Answer

HE3T beeps the H/F signal and will not continue until I hit pause once and restart the machine. There is no water inlet problem but apparently it thinks there is. I fear that one day it won't restart!

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

4,939 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...