Kenmore Elite 45986 Front Load Washer "drum track" Questions

...track Drum off track It may be a suspension spring has come off or leg has broken if it is both drums off track.If it's just the inner drum then the bearings may have failed or the spider that the ...

...track Your drum has disconnected from the rail in the dryer. Sometime a bolt can work its way out and the drun can get off track. Remove back of dryer and see if you can get the drum on its track and ...

washer drum feels like its "off track" although it will wash and empty fine when it goes into spin the drum "flops" around HOUSING CONNECTED TO DRUM IS CRACKED. MADE OF WHITE METAL, CANNOT BE REPAIRED

drum seems to be off its track. it makes a lot of noise when spinning and shakes a lot. One of the shock absorters was broken and i replaced it. this drum problem might have been the original problem.

...drum seems to be completly off track. It's either a bad suspension spring or you have a crack in the tub support. You might want to review my solution in this thread: ...

...the drum has become detached because I had too much in a load. The motor runs but the drum won't spin. how can I fix it? You might have to take the frame apart to fix it if its that far off

The drum wont spin fast. clothes remain saturated and when empty the drum feels a little loose as if it fell off a track. Many different designs in washing machines. Need model #.

...was bouncing like crazy, could the tub came off track or something like that?? check if your springs ,suspensions are in place,has the drum became noisy when in spin,if so the drum bearings have ...

How do I fix drum not turning not washing or spinning Nothing Check the belt first ,probably off the pulley ,most likely damaged but maybe good enough to at least put it back on and test the rest. A ...

...make sense if the drum is stationary Sounds like you may have a short in a wire. I would open the unit and take a look. You may want to also open it and run it to see if you can track it