Bernina 1008 "feed dog move" Questions

...feed dog does not move the fabric forward or backward,if this is so try to run machine w/o the fabric check if feed dog move on cycle,the teeth should be moving upward and downward rotation pushing ...

feed dog if that is the problem Is the feed dog raised into sewing position and not dropped as for darning? Feed dogs need to be in the raised position in order to pull the fabric through the machine.

feed dog is up but has stopped feeding Are the feed dogs moving at all--like moving toward the back of the machine, dropping down below the needle plate, moving forward, rising, and then moving toward

...feed dog lever won't move to drop dogs for FMQ. Any suggestions? Thank you Most likely the feed dog mechanism was not lubed enough to overcome the old oil that has turned to glue. It is very common ...

...feed dogs won't move. singer stylist 543 the feed dogs are frozen they will not move at all why? I suggest getting out your manual and looking up lower and raising the feed dogs. When the feed ...

...move it yourself.) With the fabric out of the way, rotate the hand wheel and check if the feed dogs are moving. Open up the bobbin compartment and clean out any lint, thread or other debris that may ...

...dog feed won't feed material. check to see if the feed dogs lever is in the up position for sewing, if not move the lever to the up position, if the feed dog lever moves and it doesn't make the ...

feed dog is stuck in the down position. Embroiders fine, but can't sew.I have tried the manual button, it moves back and forth, but doesn't move the feed dogs. Have cleaned the area. What next? if the

...below the needle plate, and the feed dog lever does not activate them, then perhaps something is disconnected in the feed dog mechanism. The feed dogs should rise when stitching

...feed dogs move switch on front of machine to the right. This does not work. Feed dogs will not rise. If the switch feel very easy to move then the linkage to the feed dogs is off somewhere. The ...