needle position dial not working the needle isn't centered over the foot and the needle position dial doesn't respond it's possible that theirs something wrong with the needle ...
Needle position adjusting dial not working I am unable to move my needle position to the left or the right on my Juki NX7. I select the needle position icon, then turn the adjusting dial. It makes a ...
Question about Bernina Sewing Machines
...needle position. Is your button hole dial activated? Sounds like a dumb question but if the indicator on the buttonhole dial is not at the top it will lock the other dials. The only other thing is ...
...needle positioning dial doesn't do anything, no matter in what position you put it in, it is on the left side, it works in straight line and zig zag but always goes back to the left side. very ...
...needle would move side to side for the end tacks. Either the dial isn't working or there is one step I am missing.This is my first time sewing buttonholes. Yes, you are right. To make out what is ...
...needle position lever is very stiff I try to move the needle position lever and it is almost impossible ...can do it but end up with raw thumb! this is probably due to lack of use and just stiffening ...
Question about Singer Sewing Machines
...needle position but it doesn't seem to do anything. Hmmm, it's a new machine so you have a manual, right? Check out the instructions in the manual. If it still doesn't work, then the machine may be ...
Question about Bernina Sewing Machines
...it straight stitch with a zig zag foot? Go back into the menu and clear everything then go to straight stitch, then press the little buttons beside the Zig Zag dial to position the needle left or ...
...position. Ensure that the upper tension dial/knob is set to 5. Thread the machine all the way and through the needle. With the presser foot still up, hold the thread from behind the needle and pull ...
65 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
56 Questions
29 Questions
