20 Most Recent
Necchi 6015 Mechanical Sewing Machine Questions & Answers
Feet not feeding and thread bunching up
the presser foot or what ever foot your sewing with does not feed the fabric,, the feed dogs in the needle plate are what moves the fabricto be sewed, the feet only hold the fabric against feed dog so themachine can use the needle to sew the fabric.if the fabric is not moving then the feed dogs have to be checkedcan you see the feed dogs in the needle plate area are the up or down? do you have a manual for the machine?a manual help to know where the feed dog lever is, I'm sending you a link for a manual for the machine, so you can look for the feeddog lever, if the feed dogs are up then there is something wrong with the feed dogs & they need to be checked.but if the feed dogs are down then look in the manual & see wherethe feed dog lever is & put it in the up position & see if that bringsthe feed dogs up to the sewing position, if the feed dogs do not come up then the feed dogs need to be checked.
http://www.sewingpartsonline.com/instruction-manual-necchi-6015.aspx
Wind a bobbin
check youtube for video's on winding a bobbinor for a manual check these sitessewingpartsonline.comsew4less.comsewusa.comsewvacdoctor.com
Bobbin thread is straight across
Reduce the bobbin thread tension. It is done by loosening the little screw on the bobbin case. It is a sensitive adjustment so turn about 1/8 of a turn at a time.
I do not have an
Hello jone...... please rewrite your question one more time starting fresh with the brand, model number and exactly what is wrong with your machine. We truly do want to help you but we need all of that info. in one place. Thanks. Joe
I have an Necchi and
Go to http://allynint.com/
Get the phone number off the web and call them, they have what you need.
If you speak to Dorothy, or Bob Coen, tell them Merry Christmas from Ellen in Arizona. Merry Christmas to you too,
I have an omega 3730m
I find that re-threading both top and bottom threads fixes the problem. Sometimes the thread has not gone through the tension springs properly. try a new needle too.
What feet do i buy for necci 6015c
I have 2 necchi sewing machines & have the following feet
1.all purpose foot
2.zipper foot
3.buttonhole foot
sewingpartsonline.com has necchi parts
I cleaned my machine and
have you cleaned under the needle plate
change the needle
make sure the thread has not come off the thread take up lever
some thread & needle don't work togeather--try this
Cut 6-8 inch piece of thread of the spool you are going to use for your project
Take the needle you are going to use for the project
& insert the thread thru the eye of the needle
& lift one end of the thread to a 45 degree angle
& if the needle is the right size for the thread it will slide down the thread
But if the needle hangs on the thread you need one size larger needle for the thread
Not finding what you are looking for?