GE Spacemaker JVM1640SJ Microwave Oven "surface light fails" Questions

...surface light bulbs were not working, so I replaced each one (they were blown). After replacing bulbs I depressed keypad for surface lights controls, but lights will not light. I also noticed that ...

...surface light On a GE microwave F3 means you have a failed keypad. We replace these for customers nationwide with our guaranteed $39.95 service. If you might want to replace it yourself, I have ...

...surface light button and the fans/lights come on with buzz/hum. Vent fans work but the grill cover does not flip open. There is sometimes a delay in lights/fan turning off. Press express cook 1:00 or ...

GE Spacemaker Microwave 5 years old Model JVM1440WH01 The Clock, Fan, Interior and Exterior Surface lights work, but it does not heat the food. Over the stove model, the magnetron may be faulty on ...

...surface light, etc.) except heating .. moved to different circuit, same results .. any ideas? Could you explain what you mean by "resets similar to power cycle after 2 seconds of running"? Do the ...

surface light works, top row bottons with clock, etc. work. No other buttons work. If I enter in the time that I want to cook my food and hit start, nothing happens. Clear button does not work. I have

...surface light, reminder. Any suggestions? Your membrane keypad has probably failed. If you might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically ...

...surface should be bare metal, smooth to the touch. use light-grade sandpaper do not use steel wool. 5. If there is evidence of poor terminal connections i.e., discolored, burned, pitted connectors), ...

...light - you should have an amp probe to check properly, but often this is a hot surface igniter problem. The hot surface igniter often looses it's ability to get hot enough to open the gas safety ...

...surface light under microwave if this is a cabinet mount you will have to remove the screws normally phillip head under unit adn swing down the bottom plate to access... if your talking about the ...