...furnace itself is working properly it just when it reaches the right temp in the house the blower will not shut down it keeps running til it starts blowing cold air again i have to manually shut the ...
...furnace was professionally inspected and cleaned less than 12 months ago and I have replaced all return air filters. I'd like to correct the problem before something breaks when it is really cold. I ...
Question about Dayton Heating & Cooling
...furnace on and it starts to run. heats up, fan goes on for about 30 -45 seconds, then fan shuts off. Burners stay lit. This will happen for about 20-30 minutes turning on and off. (probably fan cools ...
Question about Goodman Heating & Cooling
furnace fires but then cuts out. There is a similar post on here about this but my problem is a little diiferent. The unit kicks on, fires then shuts right down. The blower comes on and stays on. Then
...little flame means that your t-stat is calling for heat, there in lies the problem your t-stat is doing what it is supossed to do, your problem lies with the furnace, it could be a nuber of things ...
...furnace The ignitor will light, the blower will start up and run for a few minutes and then the system will shut down, and the blower will continue to run and cool down. The ignitor is not working ...
furnace. 2 years ago the heat exchangers where replace because we were told they were cracked. This year the downdraft motor was makikg a lot of noise & we were told the bearings were going bad,so
little motor on from of furnace), ignitor comes on, the main burner fires, just for a second or two, the burner shuts down, the main blower motor defaults to blower on! If this is the issue; Then this
...little greater than your body temperature. Place the bag on the bulb and then try and start the heater. If the heater does not start, your sensor is working but may need to be relocated. If it still ...
52 questions posted
Usually answered in minutes!
192 Questions
46 Questions
