the neck of my guitar is not straight but i alreadyadjusted the trusrod Edgar, How are you determining that the neck is not straight? If you are thinking the neck is not straight because the strings ...
...david gilmour Nos strat fret buzz can usually be cured by adjusting the tension rod, unless the neck is permanently warped from excessive heat/humidity (from, say, being left in a car on a summer ...
buzz at the e6 string 11th fret what size wrench is used to adjust neck. I have some buzzing strings when I play open chords and a dead spot at the high e string at the 11th fret. Can this be adjusted
...when new? Yes, a competent Luthier should be able to reset it... HOWEVER it may just need a truss rod adjustment. The truss rod bends the neck slightly to set string height in the middle of the
how to adjust the neck on a fender jazz bass depending on the model you will see a place for an allen wrench. it will be either on the end of the neck half way under the body, or most likely at the ...
...adjustment that will apply to all makes. http://www.acguitar.com/article/default.aspx?articleid=22188 note - with some makes / models the neck truss rod is accessed by removing a small plastic plate ...
...adjustment. A slight turn to the right brings the middle of the neck up, a slight turn to the left brings the middle down, if laying on a table looking down the neck. I would prop something under the ...
...neck adjustment rod that can alleviate some of the bow. If however the neck is convex ( higher in the middle) the neck would need adjustment too. You want a very slight bow in the neck to allow for ...
...the neck from the body Make a small adjustment Re-attach the neck Re-string the bass rinse and repeat until ...
...neck adjustment and intonation for a Gibson ES-359 custom. It doesn't seem that Gibson has anything readily available. Intonation is easy if you have an electronic tuner, and instructions for a ...
33 questions posted
Usually answered in minutes!
12 Questions
5 Questions
6 Questions