Question about Frigidaire Ovens
...Hi, The oven should ignite within 20 to 30 seconds. The most common problem is that the ignitor gets weak and will not open the gas valve like it should. This would be my first part to
...gas throughout apartment. 2.) One hour later. Oven rose to 350°, then stayed there for about 20 minutes before shutting it off. 3.) After about a 45-minute cool down time started oven again. ...
...gas not shutting off I recently unhooked and reconnected our propane stove (frigidare G30NL7) when I was through I could smell propane in the kitchen so I shut it off and rechecked my connections. ...
...20 minutes. I set the oven to 200C but the oven thermometer (separate unit) only showed the oven was at 150C Please can anyone help? Regards Mei Chin is this a gas oven or electric? i have a ...
Question about Ovens
...shuts off the gas to the burner any time the pilot and the burner are both off. If this unit malfunctions, don't try to fix it yourself; you should call a professional service person for repair or ...
Question about Kenmore Ovens
...shuts off like the cancel was pressed. Replace thermostat, overload, control panel, and control board. Any other ideas? Top oven begins to pre-heat, reaches to about 250 degrees F then cuts out like ...
Question about Blodgett Ovens
...gas safety valve other wise the temperature control thermostat or Oven comes on and off intermittently or heats very little: If the timer feature is activating and you have not touched the timer ...
...20 and 120 ohms. The exact reading differs by manufacturer and mode. If the meter reads infinite resistance or the other extreme of the scale, zero resistance, then the element is damaged and should ...
...you do then replace the control board My frigidire range oven FGF326ASA shuts off after about 20 minutes, when it shuts off everything electrical shuts down. I can still use the top because it is
20 to 30 psi at 180-190F. When it rains it pours they say and it sure is pouring my way. Do you experts thing the Amtrol tank will hold out some time or should I try the JB weld? I have a gas line the
11 questions posted
Usually answered in minutes!
69 Questions
27 Questions
29 Questions
25 Questions
