2009 GMC Canyon "fuel pump relay" Questions

Ad

Question about GMC Canyon

1 Answer

where is the fuel pump relay om a GMC Cayon should be in the fuse/relay panel under the hood. the top of the panel should have a diagram showing which relay is which.

Ad

...fuel pump or dirty fuel filter will not set a DTC code. You may have a dirty fuel filter or faulty fuel pump or faulty fuel pump wire harness or fuel pump relay. The Canyon has 2 computers, either ...

Ad

2006 Gmc canyon, acts like not getting fuel on starting up ,can hear fuelpump running,changed relays around and truck cranks. run scanner for trouble codes, some auto parts store will do this for free

Question about GMC Canyon

1 Answer

...fuel pump operation if I power up pump it works service four wheel drive on fourwheel drive inop tried relays no luck It would seem to be a fuse or fusible link problem. Check the wiring diagram in ...

Question about GMC Canyon

1 Answer

...fuel pump and putting a separate earth to one of the small connectors on the relay, check for power and earth the other ,this will by pass the alarm/cut out.If this is a bit beyond you then take to ...

Question about GMC Canyon

2 Answers

...fuel pump relays run hot. I have replaced both of them. The truck started and ran for about 30 minutes then quit. I replaced the relays and it ran for a few minutes and quit again. You could have a ...

Fuel pump relay clicking. Fuel pump was changed 5 mouths ago. Does vehicle start an run ? amp draw test the fuel pump , relay bad . Most vehicles the PCM controls the fuel pump relay . Just because ...

...fuel pump relay. Now I think it's either the power distrubition box or the fuel pump. I don't hear any noise when you turn on the key from the fuel pump. No noise from fuel pump when you turn ...

...fuel pump relay is in the engine compartment fuse block at location K4/C-1051. Fuel Pump Applications Using a Fuel Pump Relay for Fuel Pump On/Off Control The Fuel Pump (FP) is a PCM output signal ...

...fuel pump relay. When the ignition switch is first turned ON, the PCM energizes the fuel pump relay, which applies power to the fuel pump. The PCM enables the fuel pump relay as long as the engine is ...

Not finding what you are looking for?
2009 GMC Canyon Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...