Wll a 2000 model 92 ci victory motor bolt right up to a 1998 Victory bike with same size motor?

omg the driveshaft sensor determines your speed for the electronic speedo.

I have to replace the Neutral Switch Sensor, but can't seem to locate it on the bike. (Victory V92C Deluxe).

It is not the speed sensor I need to locate it's the Neutral Switch Sensor

Hi
Check the main fuse - usually located on the starter solenoid
Check condition of battery & ensure connections are good
Check wiring & connections from battery - to earth point: Check fastness
Check wiring & connections from battery + to starter solenoid and on to Ignition switch then to fuse box

Still got a problem ?

If so get a meter & check the above mentioned wiring for continuity
Check battery voltage & check for power at solenoid & at connections to / from the ignition switch

If that doesn't find the problem then try an Exorcism

Ride Safe
Bike-Doc

alighing new drive belt on my 2002 v92c victory

Seek and you shall be answered. Google it

The correct tire pressure for your front and rear wheel should be displayed somewhere inside the bikes manual, if not it might be displayed on the wall of the tire.

THE SPEED SENSOR IS LOCATED AT THE RIGHT SIDE OF THE ENGINE ABOVE THE DRIVE BELT. I HAD THE SAME PROBLEM REPLACING THE SENSOR SOLVED THE PROBLEM.