Question about 2004 Yamaha V Star Classic
Posted by Anonymous on
under the left side of the gas tank you will see i black knob/screw at the end of what looks like a hose. the knob faces the rear of bike. that adjusts the idle. its real easy to find and the only adjustment you can make to the carbs.
Posted on Apr 02, 2009
SOURCE: Need to get oil
First of all, I want to compliment you on your bike! That V-Star is in so many ways, one of the best all around bikes....Very durable engines, user friendly, comfortable and DEPENDABLE, not to mention one the best value to dollar ratio on the market, right along next to the Suzuki Boulevard....Not to get off subject but I enjoy these bikes thoroughly!
You want to make SURE that the only oil you use is a quality oil, which will have THE seal of approval stamp on the bottle that says that it meets the requirements of all the major motor corporations you want to make ABSOLUTELY sure that the ONLY oil that goes in that bike's crank case and gear box is specifically intended for use with a "MULTI-PLATE WET CLUTCH" system.....Otherwise a very bad day can be predicted. "Champion Oil" is a reputable brand and preferred thier 2-stroke raceing oil over all else when I raced 250cc class arena-cross. I have since retired from dirt bike racing to take up a much safer and peaceful profession in law enforcement....But I know Champion makes 4-stroke case oil thats compatible with wet clutches....Yama-Lube is ok too...Just make sure you see "Wet Clutch" on the bottle and it's all a matter of consistenly works best for you and preference after that.
Posted on May 16, 2009
SOURCE: Carburetor issue
make sure the oil level is correct also on carb is a screw fiddle with this mixture screw and get back to me if it made no difference i will send a pic in a while
Posted on Oct 06, 2009
Tips for a great answer:
Aug 29, 2017 | Yamaha Motorcycles
Apr 14, 2009 | 2001 Yamaha V Star Classic
Apr 01, 2009 | 2002 Yamaha V Star Classic
68 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: