20 Most Recent 2008 Cpi Formula R Questions & Answers

0answers
0answers
0answers
0helpful
1answer

All the lights are not

Hello and welcome to FixYa!
As a first course of action, I strongly suggest that you remove the positive battery connector and let it sit for atleast 5mins. or more before reconnecting it. This will reset the system and can get your vehicle back to it's normal operation.
Hope this helps and thank you for using FixYa! Have a good one!
8/17/2011 2:27:40 PM • 2008 Cpi Formula... • Answered on Aug 17, 2011
0helpful
2answers

Where can I get a wiring diagram for CPI SX 250

Contact the manufacturer/distributor directly to inquire.
4/24/2022 5:55:32 PM • Cpi Motorcycles • Answered on Apr 24, 2022
0helpful
1answer

GTR 50cc scooter. Where is spark plug?

Spark plug is fitted into the cylinder head - somewhere! Cylinder head is at the top of the engine that has a vertical or nearly-vertical cylinder or with a horizontal cylinder is usually the forward-most part. Spark plug has a thick wire connected to it so if you can see a thick wire try following it... If you are thinking of replacing your bike's spark plug, take great care when refitting. The threads are fine and cross-threading is easy to do so always fit the new plug and screw in at least two full turns by hand and take great care not to overtighten it. Most new spark plugs are fitted with a collapsible washer to ensure a gas-tight seal. The washer can be felt collapsing in the last approximately 60 - 90 degrees of turning and equally it can be easily felt when it has finished collapsing. From that point it needs only a few pounds of additional pressure on a 6 inch wrench to finish the job. When refitting a plug with a used washer, once contact with the cylinder head is made, it only needs that small amount of wrench pressure for it to be tight enough.
12/16/2020 1:11:42 AM • Cpi Motorcycles • Answered on Dec 16, 2020
0helpful
1answer

How can i find what kind of engine my cpi scooter has

look for any serial numbers it might have then put info into google. or come back on here with all the info and some one might be able to help you out.
11/13/2016 7:31:43 PM • Cpi Motorcycles • Answered on Nov 13, 2016
0helpful
1answer

I have a cpi sx 250 what should the tire pressure be?

34 PSI front and rear.
9/7/2016 9:19:07 PM • Cpi Motorcycles • Answered on Sep 07, 2016
Not finding what you are looking for?
2008 Cpi Formula R Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cpi Experts

NOEL
NOEL

Level 3 Expert

8606 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

Are you a Cpi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GMAX 250LQ Cpi

  • GMAX 250LQ Cpi

Most Popular Question

all lights not

  • Motorcycles
Loading...