Upstream O2 sensor location?

You have 2 of those and also 2 downstream. You have two banks of cylinders and each one has an upstream o2 sensor and it is located in the exhaust manifold for each bank. Your scan tool should say Bank 1 or Bank 2.

The downstream sensors are after the catalytic converter.

What are the symptoms of a bad upstream O2 sensor? Sensor 1 Sensor 1 is the upstream oxygen sensor. It is the sensor that measures the oxygen content in the exhaust, providing an input to the computer, which determines how to adjust the air/fuel ratio. Sensor 1 is the sensor closest to the engine. Sensor 2 is the downstream oxygen sensor.
Mar 10, 2021

Bank 1, Sensor 1? Upstream or Downstream? - Newparts.com

https://www.google.com/search?q=2015+Chevy+Impala+3.6+upstream+o2+sensor+location

The 2005 Jeep Grand Cherokee Laredo 3.7L typically has two oxygen (O2) sensors. One is located upstream (before the catalytic converter), often referred to as the pre-cat or upstream sensor, and the other is located downstream (after the catalytic converter), known as the post-cat or downstream sensor. In many cases, the upstream and downstream sensors are not the same and serve different purposes in monitoring and optimizing the air-fuel mixture and emissions.

Here is the low-down on oxygen sensors, and their location designations explained:

Oxygen sensors are screwed into the exhaust system at various points. Some people say that there are 4 oxygen sensors, but technically, that is not correct. Only the front 2 are considered oxygen sensors.

These oxygen sensors are screwed into the exhaust pipe or directly into the exhaust manifold, one on each bank. Because they are in front of the catalytic converter, this is often referred to as 'upstream'.

The other 2 are actually called catalyst monitors. They are oxygen sensors, but they serve a different purpose. They monitor the activities of the catalytic converters, thus the name, catalyst monitors. They are screwed into the exhaust one on each bank, after, or downstream, of the catalytic converters.

On a 4 cyl engine, there are only a total of two such sensors, the one in front of the catalytic converter is the O2 sensor, the one behind the cat is the catalyst monitor.

The location names for them are as follows:

• On a 4 cyl, the front / upstream is called "bank 1 sensor 1" and the rear / downstream sensor is called "bank 1, sensor 2."
  
  
• On a V6 or V8 engine:
  
  
  • the passenger side bank on a forward facing engine, or the bank closest to the firewall on a transverse mounted engine, is bank number 1, so the forward / upstream sensor on that bank would be "bank 1, sensor 1."
    
    
  • The driver's side bank (forward facing mount engine), or front bank (transverse engine) would be bank number 2, thus the forward / upstream sensor on that bank would be "bank 2, sensor 1," and the rearmost / downstream sensor on that bank would be "bank 2, sensor 2."

You will have 2 O2 sensors, One will be in the exhaust system before the catalytic converter and this is the upstream one, the other will be after the catalytic converter and this is the downstream one. Have a look and it should be reasonably obvious. it will have a cord running to it with 3-4 wires.

On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...







The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Ho Joanne:
On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...







The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

YOU HAVE 2 O2 SENSOR YOU HAVE UPSTREAM 02 AT EXHAUST MANIFOLD AND DOWN STREAM 02 SENSOR LOCATED IN THE EXHAUST PIPE AFTER THE CATALYTIC CONVERTER.

Downstream O2 sensor is after (downstream) the catalitic converter on the exhaust pipe. Upstream O2 sensor is after (downstream) the engine exhaust manifold - before (upstream) the catalitic converter. Upstream O2 sensor controls air-to-fuel ratio to yield a small excess oxygen. Downstream O2 sensor assesses the catalitic converter performance.

if it is a cyl. you will have a few of them on the exhaust, you will have an upstream located before the catalytic converter, and a down stream after the converter. If it is a v8 you will have the same except a bank 1 uptream and down stream, and a bank 2 upstream and down stream (two in the left and two on the right).

Upstream means that the O2 sensor is located ahead of the catalytic converter.