Hi, you can drive the car with this code, and there is no safety or drivability issue. The Jeep uses a pump to test the fuel vapor emission control system, and your pump is acting up. So the computer will not be able to test your system for vapor leaks.
Please let me know if you would like troubleshooting procedures to determine the exact problem, and thanks for using FixYa.
Trouble Code: P1494
EVAP Leak Detection Pump Switch Or Mechanical Fault
Possible Causes:
LDP switch signal circuit is open or shorted to ground
LDP switch power circuit is open (test power to Fused Ignition)
LDP vacuum hose is clogged, loose or restricted
LDP assembly is damaged or has failed (the switch has failed)
465 views
Usually answered in minutes!
×