Need distributor cap and spark plug wiring order for 1998 chevy pickup

It can be faulty or dirty spark plug itselfd.Also for reference get the fuel level checked.Is the fuel tank is empty or near to empty.
Try cleaning the spark plugs and then see if that is helpin.On some cases the black carbon layer gets collected on the spark plugs and that causes the problem,so cleaning the plugs help.But if its not helping,then spark plug has to be replaced.Spark plugs get power from ignition coil to ignite sparks.If ignitioncoils are faulty then also there will no spark.--------------

To troubleshot and confirm the issue,i suggest you to go through the help links provided below,check the procedure and it will help you to confirm the issue in your case.
----------
Click the link below:------

Car cranks, has spark but will not ?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

-----------

The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

------------

How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

---------------

How to Perform a Basic Engine Tune Up-Spark Plug and Wire Change

http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up_01.html

----------

Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

---------

How does the spark plug wire go on the distributor cap in 1991 Mitsubishi Mighty?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

------------
No spark on 2008 Chevy Avalanche?

http://schematicsdiagram.blogspot.in/2012/04/no-spark-on-2008-chevy-avalanche.html

-----------

How does the spark plug wire go on the distributor cap in 1985 Pontiac sunbird?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wire-go-on.html

--------------

Ford Plug Wires Not Coming out?

http://whoisbyme.blogspot.in/2012/06/ford-plug-wires-not-coming-out.html

--------

Ford explorer has no spark?

http://schematicsdiagram.blogspot.com/2011/12/ford-explorer-has-no-spark.html

----------

Chevy impala spark plug firing order diagrams?

http://technoanswers.blogspot.in/2012/02/chevy-impala-spark-plug-firing-order.html

------------

How to gap spark plug on Chevy Impala?

http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------

Spark plug Replacing for chevy impala?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

Chevy s-10 blazer 4.3l Spark Plug Firing Order?

http://howtobyme.blogspot.com/2011/12/chevy-s-10-blazer-43l-spark-plug-firing.html

----------------

1982 dodge rampage Spark plugs Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/1982-dodge-rampage-spark-plug-firing.html

----------------

2006 Suzuki Forenza Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

------------

1983 Ford Ranger Spark plug firing order?

http://schematicsdiagram.blogspot.com/2011/12/1983-ford-ranger-spark-plug-firing.html

--------

Firing Order for 1991 Lexus ES 250?

http://schematicsdiagram.blogspot.com/2011/12/firing-order-for-1991-lexus-es-250.html

----------------

Firing order for 1992 Chevrolet 5.0 engine?

http://schematicsdiagram.blogspot.com/2011/12/firing-order-for-1992-chevrolet-50.html

-----------

How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

-----------

How to remove rear spark plugs on 1991 Buick Regal?

http://howtobyme.blogspot.in/2012/02/how-to-remove-rear-spark-plugs-on-1991.html

---------------

These details will help.

Thanks.

For spark plug problem,click the help links provided below :---Car has no spark?http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
------------How to Replace Spark Plugs?http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ?http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html-----------Spark plug Replacing for?http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram?http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.

If it is the 1.6 liter 4 cylinder here is a diagram for you. Hope this helps.



Sorry it wouldn't let me post it any bigger. If you need more help I can forward you a link.

Dependent on which way your rotor button turns (clockwise or counter-clockwise), the firing order is 1-3-4-2. If you're unsure and the distributor cap doesn't have an arrow denoting which way the rotor turns, you'll have to remove the distributor cap and have someone crank the engine over to see which way it turns. Now, if you have ALL your wires from the distributor cap removed, you'll have to locate TDC (Top Dead Center). Remove spark plug number 1 and rotate the engine clockwise (as you're looking at it), with the distributor cap off until you can insert the end of a screwdriver into the spark plug port to feel the top of the piston touch the screwdriver. Remember, the Crankshaft goes around twice for every time the camshaft goes around once, so look at the timing marks on the Crankshaft and make sure there lined up at "zero", the piston is touching the screwdriver, and where ever the rotor is pointing...that's number one cylinder.

I hope this Helps. Let me know.

~00 Buck~

"Still living on the Right Side of Dirt..."

Firing order 1,6,5,4,3,2. To find number 1 plug at distributor set timing mark to top dead center on compression stroke and with distributor cap removed rotor will point to number 1 cylinder in cap. Also number 1 cylinder is on drivers side all the way to the front the next cylinder behind that is number 3 and then 5. So passenger side all the way from front will be 2,4,6 at the firewall. Number 1 plug wire will also be the second longest wire in most cases or as long as number 2 cylinder. Hope this helps.

This is a one piece distributor. It has the coil and pickup sensor all built in. Check and see if you have 12 volts on the large red wire that plugs into the cap while the key is on. (The other wire is for a tachometer if you have one). If you have power and there is no spark from your ignition wires, your pickup module is bad in the distributer. Very rarely have I seen a failed coil.

For a 1985 Chevy S10 with a 2.8L engine the firing order is: 1-2-3-4-5-6 The Distributor rotation is clockwise.Take off the cap and bump engine till the rotor points to the no. 1 plug. this is the no.1 contact on the cap. follow rotation around the cap in order. {ie. 2,3,4 ect.} hope this helps.

Check to see if it has spark. It may be having a problem with the distributor. If you have put fuel to it to no avail, then you probably dont have spark. Could be the cap / rotor, the coil, the pickup in the distributor, or power going to the coil or distributor. Check for spark and if you dont have any, make sure you have power to the coil / distributor. If you do then try a new coil cap and rotor. Hardest part would be the pickup in the distributor if thats bad.
Heres a link to an article on the types of distributors and how to rebuild them.

http://reviews.ebay.com/HEI-Ignitions-A-primer_W0QQugidZ10000000002053885

Hope this helps...

sounds like your timing is off by 180 degrees

pull the distributer out.

hold the body and turn the rotar arm 180 degrees and push it back in.