Passenger airbag light stays on - Envoy GMC Cars & Trucks

Mail [email protected]. Do it now cause he only replys m-f

Could be a problem with the sensor in the seat. The system thinks someone is sitting in the seat and the seat belt is not fastened.

The light comes on to indicate that the passenger side airbag is disabled. This occurs when there is weight, but less than 60 pounds on the passengers seat. Removal of the weight should cause the light to go back out.

Its a weight sensitive sensor, so you would probably have to come up with some sort of resistor. I doubt you can bypass it.

do you have the airbag disabled on the passenger side? have you turned the key in the disable passenger side airbag. if the airbag is disabled then the light will stay on

Light is on because the system has detected a fault. A code read is needed to discover the nature of the fault and then after repair dedicated diagnostic equipment will be needed to clear the code.

Sometimes the airbag light will stay on when the passenger airbag is switched off, if it has that facility.

The actual problem might not be the airbag but the seatbelt pretensioners.

Don't know what year model car you have. Some year models have a switch you can turn the passenger air bag off. Check you owners manual in the dash/controls section and the air bag section

umm not sure on the 02 but sounds like u are looking at the passengers side air bag light when that lights on means there is a problem with it and its not working so if its off that would be the problem and the reason it turns on some of thiem have a x2 symbol on thiem to let u know its the passenger side

You have a problem with the SRS. Working on this system can be very dangerous. For that reason I recommend you have this repaired by a professional.

You have a bad Passenger Air Bag Deactivation Indicator. The bulb that shows when the passenger air bag is off.
Have seen alot of these go bad especially in police cars. The part number you need is 5W1Z-10A936-A.