At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your power window motor's are getting weak, time for replacement, sooner or later will blow fuse to window motor's, due to motor's are asking for to many amps to work, will over load circit and blow fuse.
Probably a resetting circuit breaker in the system. Some are reset when they cool off, others when keyed off. Must be something drawing too much current, or circuit breaker getting weak. Usual causes of drawing too much current in your case would be power window motors. With that said, there are some things you can try to lessen the load on the circuit such as spraying silicone down sides where felt is for easier window movement. Those areas get dried out and tend to grip glass as it's going up & down causing extra load on motor. I've also had to resort to removing door panels & spraying grease on tracks & guides inside door, to help. try silicone down sides first and see if it helps. Also make note if one window seems to cause it more than another, that gives you a good one to start on.
×